• 4x RJ45 Gigabit Ethernet Ports:
  Supports both single-link and dual-link output modes.
  Note: This card does not support the fade transition effect.

• Transmission Distance:
  Achieves up to 100 meters when using Cat5e or Cat6 Ethernet cables.

Single-Link Output Mode:

• All four connectors are available for output.

• Maximum supported resolution per connector: 2048×1152 @ 60Hz.

• Custom Resolution Options:

  • Maximum width: 2560 pixels (e.g., 2560×983 @ 60Hz)

  • Maximum height: 2560 pixels (e.g., 884×2560 @ 60Hz)

• Supports output formats:

  • 8-bit: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2

  • 10-bit: RGB 4:4:4, YCbCr 4:4:4

Dual-Link Input Mode:

• Only connectors 2 and 4 are available for output.
  (Connector 1 duplicates the output from connector 2, and connector 3 duplicates the output from connector 4.)

• Maximum supported resolution per connector:

  • 4096×2160 @ 30Hz or 3840×1080 @ 60Hz.

• Custom Resolution Options:

  • Maximum width: 4096 pixels (e.g., 4096×1130 @ 60Hz)

  • Maximum height: 4096 pixels (e.g., 1014×4096 @ 60Hz)

• Supports output formats:

  • 8-bit: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2

  • 10-bit: RGB 4:4:4, YCbCr 4:4:4

Status LEDs:

• Green (on) and Yellow (flashing): Indicates that the backend device is connected via the Ethernet cable.

• Green (off) and Yellow (off): Indicates that the backend device or Ethernet cable is not connected.

Specifications:

• Weight: 500 g

• Dimensions: 193 mm × 247.12 mm × 21.15 mm

• Power Consumption: 32 W